Iridium Levitation
by Barry Carter
I have been researching the "levitation" effects
associated with ORMUS iridium. These effects were first associated with ORMUS
iridium by David Hudson, though I was already familiar with them from my friend
Jim's experiences back in 1989.
In 1990 Jim stated telling me about the "fly ash"
that would levitate away from his hands whenever he would reach for it. Here
are transcripts of some of the things that Jim said about this "fly
ash":
Jim: …when it evaporated and dried
it turned into fly ash.
Barry: Why do you call it fly ash?
Jim: Because whenever you'd reach
for it, it would fly away.
Barry: Where did it move?
Jim: Anyplace it had to. Up the side of a jar, out of a pan. Unless it was wet you
couldn't handle it.
_______________________
Well, yeah, it was kind of a flake.
Little flakes that came off of wedges between the acrylic in the carbon air
cell. We had some of those in a jar and you would reach for it and they would
move to the other side of the jar and stuff. Especially in a garage wall lined
with tools. You know iron tools hanging everywhere. It was pretty alive.
Barry: What do you mean by “pretty
alive”?
Jim: It moved a lot. By itself.
_______________________
“when the
charcoal was damp we could pan it out, we could separate it and we could work
with it. When it was dry, it was out of
there. I mean it was out of there!”
This particular property of the material that Jim
experienced was one of the most intriguing properties for me and Jim. When we
heard David Hudson speak of this levitation phenomena
as being a property of ORMUS iridium in his
Jim was also quite reassured to hear that:
"primarily
rhodium and iridium are the elements that are in your body right now. And that
literally they resonance connect and literally flow the light of life
perpetually in your body. And around your body you have a non polar magnetic
field which is called the Meissner field or they refer to it as the aura."
In his first
"Oh, when we make it to the monoatomic state we hydrogen reduce it, we oxidize it,
hydrogen reduce it and then we anneal away the hydrogen. In the annealing with
the hydrogen it goes snow white. When it's in that snow white state, under an
inert gas atmosphere and we cool it down, you can actually take your hand and
run it about 6 inches under the tube, you know a long distance away from it,
and the material flies around inside the tube. And yet if you take a magnet and
run it 6 inches under the tube, nothing happens. And yet you put the magnet
down and put your hand back and it flies around again. And what it is, it's the
subtle magnetic field of your hand which your body, I don't know what..., does
anybody know what the magnetic field of the body is about 6 inches away?"
(You can read more about the questions that this raises
about why David Hudson's patent was denied at:
http://subtleenergies.xyz/ormus/tw/denial.htm
)
"This little zero point
frequency I showed you between the positron and the electron; if you follow
that right up the electromagnetic spectrum, it agrees with the molecular
frequency of hydrogen dioxide, or water.
So there is an affinity for this material and water. That's why it is normally taken in
water. When you come to understand that
your body is, in fact, mainly water.
That, literally, this material when you distill water it distills with
the water as the oridide, the iridide,
the ruthidide. Just like chlorine. And so if you distill water thinking you are
getting high purity water, it goes with the water. And it literally changes the bond angles of
the water. That one iridium atom
controls 56 waters of hydration around itself.
And all the bond angles of all 56 waters are altered when iridium is
present. I haven't carefully studied the
research work of people working with water but I strongly suspect that their
water isn't completely pure and they are finding that the bond angles can be
changed. There is something else besides
H2O in the water."
This was an incredible revelation! David Hudson believed
that ORMUS iridium was even in distilled water! This means that ORMUS iridium
would even be in water vapor in the air.
In early 1997 I learned about the gentleman we call the
Essene and got to visit him on
The Essene: Iridium m-state, that's
the one that
Barry: Jim got a material he called
"fly ash" because it would fly away when he reached for it. It still
does today inside its bottle.
The Essene: It's m-state iridium. It
does that. When it's in metal form it's the heaviest metal on earth. When it's
in the m-state it's the lightest, in classic form.
_______________________
When I took Jim to meet the Essene
on
Barry: What is the process for
getting m-state iridium into a levitating disc?
The Essene: First you make up your
m-state iridium fresh. And you mix it into ceramic clay. I use porcelain clay.
I mix it very, very thoroughly. The idea of annealing it is to spread the
iridium molecules out so that they are even. Because any place where they are
clustered they lose their spin. I anneal it in a toaster oven or a cupelling furnace. As you anneal it they push apart from
each other and spread out evenly. This is the whole idea of annealing it.
Iridium will only work if it is set in something that is holding it apart like
an egg crate.
_______________________
I'll tell you a story that you may
be interested in. Nikola Tesla got a group of scientists together and rented
M-state iridium is a gravitational
shield. It won't allow the gravitational force to penetrate it. I don't really
know why. There is no force field of any kind. I went to
Barry: This is the principle that
Jim's magnetic trap works under. It expels the m-state iridium, probably.
Jim: You spin the water over a
magnetic field. The mono levitates against it and you pull it out with a
wicking material that is hydrophobic.
The Essene: Same thing.
_______________________
The Essene: Iridium m-state is a neat metal. You ought to play with it
sometime. I take iridium and turn it into m-state. It's not a stable m-state, it won't stick around very long. Six months to eight
months, it'll go back in at that time if you have a quart jar of it. But while
it's in m-state I take and I mix it with porcelain clay. And I mix it all up
like [?].
Barry: How much porcelain?
The Essene: Just enough to bind it.
I stir it up real good and put it out and dry it. Then I put it in the furnace
and start annealing it. On the 8th or 9th annealing you open the furnace door
and it will be setting in the middle of the furnace. Yes, the annealing
temperature is about 800C. Not too high. The gravitational field will not go
through that disc any more. Neither will an electric or magnetic field.
Alright, you spin it and there is no energy force that can penetrate it. If you
have 2 discs spinning with a wire down the middle of them and a lamp connected
at the other end, the lamp cannot be energized. The electricity will not flow
in that wire.
Barry: Jim was using ozone on some
mining waste. He was getting a lot of gold and some clear snot in the bottom of
the whole thing. It was m-state. When he dried it out in the dark it would
float away.
Jim: We put it in bottles as a joke.
We called it "fly ash". It would levitate in the jar. You reach for
it and it was move away from the side of the jar you were closest to.
The Essene: If you took that and
mixed it with porcelain ceramic before it goes to hell… In 6 to 9 months it's
dead.
David Hudson also said that his "annealed" ORMUS
iridium would not levitate for more than a few months. He also claimed that
ORMUS iridium was the second most abundant ORMUS element in his ore. He said
that it was about 33% of the ORMUS in his ore compared to the m-rhodium which
was nearly 50%.
The Essene also claimed that ORMUS iridium is quite common
in nature. He said that it is approximately 6-9% of dried
You can compare the descriptions of levitating white powders
from David Hudson, Jim and Michael Burbury at:
http://subtleenergies.xyz/ormus/tw/flyashall.mp3
In 2006 I posted the following to the ORMUS forum:
From: Barry Carter
<[email protected]
Date:
Subject: Re: [ORMUS] NEED ADVICE
David Hudson described this kind of
thing happening, while he was doing thermo-gravimetric analyses (TGA), in
several of his lectures. David Hudson's references and the TGA disappearance
probably were all related to the white powder of iridium. See the figures from
his patent at:
http://subtleenergies.xyz/ormus/patents/figures.htm
Notice that in the TGA figures 8-17
there is the following legend in the upper left corner of each heating and
cooling cycle chart--IRIH for IRIdium Heating and
IRIC for IRIdium Cooling. Also notice that in his
patent he only describes doing the TGA on the m-iridium. He does not make any
claim that the m-gold has these same properties.
A scientist named August replicated
some of
http://www.pacificcombustion.net/manufacturer/images/lindberg/TubeFurnace.jpg
Then he used the TGA to measure
weight changes as described in
http://subtleenergies.xyz/ormus/tw/tga.jpg
Here is his description of the TGA
process he used on the m-iridium:
"Our PerkinElmer TGA-7 was able
to show that there are unusual transition states during long term annealing
under hydrogen and argon, indicating that the atom can be excited to strong
diamagnetic states. In fact strong enough to produce results indicating that
the sample had lost 200% of its starting weight. Obviously the device is not
calibrated to deal with this kind of field event. In the screen capture from
the 24, 25 and 26th thermal cycle, after an initial induction period, the
material acquiesces into a regular thermal pattern, well below the original
sample starting weight."
He sent me an image of the screen
showing this thermal pattern described above and I have uploaded it to:
http://subtleenergies.xyz/ormus/tw/wtchange.jpg
August also made some "gold
glass". You can see a picture of it here:
http://subtleenergies.xyz/ormus/tw/transparentgold.jpg
As far as I know, the gold glass did
not exhibit any superconductive effects.
He said that the m-gold powder was
weakly diamagnetic and became more so as it approached ambient temperature in
SQUID testing. In another form it was significantly attracted to magnetic
fields.
This diamagnetism was not strong
enough to levitate the white powder visibly away from a magnet like the grey
powder levitated away from the magnet in my video of the m-gold Jim made using
ozone.
Here is the link to a scanning
electron microscope image of August's white powder:
http://subtleenergies.xyz/ormus/tw/image24.jpg
He described this image thus:
"What you are seeing are bound state spheres of monatomic gold regions electrostatically bound into the beautiful material that it
is....."
August told me that the white powder
of iridium jumped away from his hand in a way which suggested an electrostatic
response. August sent me a short video of the "annealed" white powder
of iridium first attracting to his hand and then being repelled from his hand.
August says that this looks like a static electricity effect but cannot rule out
the possibility that it might be a Meissner effect. This matches
http://subtleenergies.xyz/ormus/tw/StaticIridium.wmv
I have some ORMUS iridium that I got
from rawfood.com a year or so ago. When I put this m-iridium in a petrie dish it also exhibits a similar
static electric effect of moving away from the petrie
dish when I rub it with my finger. Here is a picture of this product:
http://subtleenergies.xyz/ormus/tw/m-iridium.jpg
I do not know how this product was
made.
Above I quoted August as saying that
he ran the TGA on the m-iridium and measured a 200% decrease in the weight of
his sample after "annealing" it using over twenty
"annealing" cycles in the tube furnace. He could not say what the
cause of the weight changes was but speculated that it might be some kind of
Meissner effect from the m-iridium.
August is a professional scientist
and does not confuse speculation with fact. He did note that at a certain point
he could no longer see the m-iridium sample in the TGA but he could not say
whether it became transparent, went into an invisible gas state or went
elsewhere.
You can find a picture of the
"annealed" m-rhodium, m-iridium and m-gold that August made at:
http://subtleenergies.xyz/ormus/tw/white-m-powder.jpg
You can see pictures of his gold
solution at various stages of his process at:
http://subtleenergies.xyz/ormus/tw/gold_transformation.jpg
David Hudson and August have both
said that the "annealed" m-iridium powder quits jumping away from
your hand after a week or two. If the jumping is a static electricity effect
this would make sense since the super dry powder would be more responsive to
static electricity while it is very dry out of the tube furnace and would
become less responsive to static electric effects as it gained moisture from
the atmosphere.
I made a video of a powder that Jim
made from gold which levitates away from a magnetic field. This behavior is a
much better match to a postulated superconductive levitation effect than that
of
All of this brings up questions about certain historic
stories of levitation. In order to clarify these questions it is important to
list some of the properties that have been claimed for ORMUS iridium by David
Hudson and the Essene. These speculated properties are:
·
It is common in living tissue.
·
It is in all water vapor.
·
It is quite abundant in certain rock
source materials.
·
It levitates when spun in a ceramic
disk.
·
It levitates when
"annealed" eight or more times.
·
It becomes a permanent levitation
substance when it is "annealed" into an "egg crate" style
matrix form.
·
It responds to electrostatic fields.
Michael Burbury's experiences also suggest that his dew
powder responds to electrostatic fields.
Let's see how these properties might apply to historic
reports of levitation.
In his book The Alchemy Key, Stuart Nettleton wrote:
“Jewish Midrashim
commentaries describe how the Ark of the Covenant levitated and carried along
some of the people who were supposed to be carrying it.”
In The Alchemy Key, Stuart also describes how:
“if an
ordinary person approaches the
The Bible says that the manna from heaven was stored in the
Hebrews 9:4
Which had the golden censer, and the
ark of the covenant overlaid round about with gold, wherein was the golden pot
that had manna
Like Michael Burbury's levitating powder, this manna was a solid
residue which came from the dew:
Exodus 16:13-15
And it came to pass, that at even
the quails came up, and covered the camp: and in the morning the dew lay round
about the host. And when the dew that lay was gone up, behold, upon the face of
the wilderness there lay a small round thing, as small as the hoar frost on the
ground. And when the children of
The flying carpet stories appear to describe similar ORMUS
related properties. Here is a note that I posted to the ORMUS forum a few
months ago:
Date: Thu,
Subject: [ORMUS] Flying Carpets
Dear Friends,
During one of my breaks, while
giving my workshop in
In the Ben Sherira
chronicle, certain passages describe the workings of a flying carpet.
Unfortunately, much of the vocabulary used in these parts is indecipherable, so
little has been understood about their method of propulsion.
What is understood is that a flying
carpet was spun on a loom like an ordinary carpet; the difference lay in the
dyeing process. Here, the artisans had discovered a certain clay, 'procured
from mountain springs and untouched by human hand', which, when superheated at 'temperatures
that exceeded those of the seventh ring of hell' in a cauldron of boiling
Grecian oil, acquired anti-magnetic properties.
Now the Earth itself is a magnet,
and has trillions of magnetic lines crossing it from the North to the South
Pole. The scientists prepared this clay and dyed the wool in it before weaving
it on a loom.
So, when the carpet was finally
ready, it pulled itself away from the Earth and, depending on the concentration
of clay used, hovered a few feet or several hundred feet above the ground.
Propulsion went along the magnetic
lines, which acted like aerial rails. Although they were known to the Druids in
It sounds like the clay in this
story would be a good candidate for being a high ORMUS source.
I did a search on some of the words
in the passage above and found the following web link where the entire document
is reproduced:
http://keelynet.com/gravity/manflight.htm
The web page above also has a good
reference to the flying platform of Victor Grebennikov who wrote a chapter in
his book about a flying platform that he used to collect insects. You can read
this chapter of Grebennikov's book at:
http://www.keelynet.com/greb/greb.htm
or at:
http://subtleenergies.xyz/ormus/wg/Grebennikov/Grebennikov-Eng.htm
Both flying devices have at least
two things in common. Both use a mysterious substance from natural sources and
both have a repeating shape or pattern that may contribute to the levitation
effect.
For this reason and other reasons I
am quite intrigued by recent discussions of how "shape power devices"
might enhance ORMUS effects.
While August's demo of ORMUS iridium jumping away from his
finger is a pretty good illustration of this property, I have a better demo
that I did a couple days ago.
In about 2005 I got a small bottle of a product called
"Manna Monoatomic Iridium from www.rawfood.com.
You can see a picture of this bottle that I took yesterday at:
http://subtleenergies.xyz/ormus/tw/iridium.jpg
I have eaten a few bits of this product but most of it I
have saved for reference purposes. I have a few bits of it in a plastic petrie dish and two days ago I
took a video of it jumping away from my fingers. You can download and watch
this video at:
http://subtleenergies.xyz/ormus/tw/Iridium&Fingers.wmv
I am not sure how this ORMUS iridium was made. It does not
look like August's product or like Michael Burbury's product. I would guess
that the apparent structure of the particles helps to keep them stable so that
they are still "active" after sitting in my office for almost four
years.
You can read more about my favorite hypotheses concerning
the physics of levitation at:
