Static
by Barry
Carter
Created:
Modified:
I first learned about the ORMUS elements in 1989 when my
friend Jim got his hands in some energetic ORMUS water and started having
strange things happen. These strange things included lots of electrostatic
sparks as described in Jim’s Story at:
http://subtleenergies.xyz/ormus/tw/MyStory.htm
http://subtleenergies.xyz/ormus/tw/JimStory.htm
Since then I have posted a number of comments on this to various
forums. Here are some excerpts from these comments:
To TheWork
A small meter for measuring
electrostatic energy is quite useful for measuring or at least identifying the
presence of m-state elements. Jim has
modified an electrostatic meter to be more sensitive but claims that a simple
meter can be made from Radio Shack parts.
He has promised to give me a design and parts list one of these days.
According to Jim's theory,
electrostatic meters measure weak beta radiation from the m-state elements.
To WhiteGold
One typically gets a very high
reading from an electrostatic meter in the presence of ORMUS materials.
BDnow
You can use a slightly modified
electrostatic meter to identify rock, water or air with a lot of ORMUS in it.
So, you still haven't seen Jim's
electrostatic meter circuit drawing.
I have resized the images and put
them on the web so you can look at them with your browser. They are at:
http://subtleenergies.xyz/ormus/tw/meter1.jpg
http://subtleenergies.xyz/ormus/tw/meter2.jpg
The use of an electrostatic meter to
detect ORMUS was first suggested by Jim. Jim has used his electrostatic meter
since about 1996 as an ORMUS detector. He says that he had to make it a bit
more sensitive in order to put the ORMUS range at full scale but that an
ordinary, off-the-shelf meter will work. A couple years ago I got him to draw
up a schematic for a meter that anyone might be able to build and he drew the
plan at:
http://subtleenergies.xyz/ormus/tw/ORMUSmeter.jpg
on a piece of
scrap paper. You can see a cleaner version of the circuit diagram at:
http://subtleenergies.xyz/ormus/tw/ORMUSmeter2.jpg
As far as I know, no one else has
tried this method for detecting ORMUS.
Others have also commented on this topic:
Subject: electrically (static?) charged
Date:
Hey Ya'll,
Does anyone have any ideas why ORMs (new term avoiding previous and easier to type) would
throw sparks from dispenser bottle to fingers? They jump at least 1/2 inch,
loud enough to hear across the room, and sting too!
I quizzed Barry on this one and he
doesn't have a clue. This could get back to the
From: "Michael Burbury
Date:
Subject: [ORMUS] Ormus - To Magnet
or Not to Magnet - that is the question...
Hi there all,
I seem to be getting increasingly
confused with respect to what people are doing to "create" their Ormus and observed reports of how Ormus
reacts to Magnets, EMF, Static Electricity Fields and
so on.
In all my experimentation, I see
that Ormus is basically repelled by Magnets, EMF and
the like, yet I see others using magnetic blenders, even saw a bottle
surrounded by magnets which simply made me think "what self-respecting Ormus would want to stay in there!?!".
Then you have the use of magnetite which is slightly magnetic, though generally
does not maintain a magnetic memory.
So the question is:
Does Ormus
get attracted to or charged by a magnetic or static electricity field - or does
it get repelled by it?
Experiment 1. While doing
a wet method precipitate, get a very large piece of Styrofoam, rub it with a
soft cloth to build up a large static electrical field, then
place it over the container you do the precipitate in. In all cases I have tried
this, the precipitate is repelled - in fact it RUNS from the field so fast it’s
not funny.
(Precipitation done
in literally 5 mins!)
Experiment 2. Cut a hole
in the same Styrofoam block big enough to fit a small bottle. Put some
precipitate into a small bottle and then into the Styrofoam hole and cover it
over so its dark. The foam has still got a fairly
large static electrical field, but this time, after only a few days, take the
bottle out and you have TWICE the precipitate in the bottle than what you had
when you put it in there!
What tha!
Its seems to be the
same with magnetic fields as well. If the field is all pointing in one
direction (IE: North) and you bring that near some Ormus
from just one side, it gets repelled. Yet, if the field alternates (IE: North +
South) and completely surrounds something that Ormus
can hide in, it’s like a mega attractant.
So I am confused. I have done
experiment after experiment and I am at a loss as to why Ormus
can be attractive in some situations, but repelled in others. However, I can
see why the magnetic blender could use a little work - there is nowhere for the
Ormus to hide, so I'm guessing after a few seconds -
its outa there! Perhaps if the design had the ability
to include both upper and lower magnets and perhaps something suspended in the
middle for the Ormus to hide in?
Anyway, open thread for discussion,
to magnet or not to magnet?
Cheers...
Michael Burbury
http://subtleenergies.xyz/ormus/tw/MB-ORMUS-Charger1.htm
